Bingo Airsoft Designs AS5 (Polarstar Jack)
The patent pending Bingo Airsoft Designs Advanced System 5 (AS5) airsoft rifle is now available!
The AS5 has been indevelopment for more than two years. It was conceived from the ground up as theultimate airsoft gun. It is designed to be very flexible and customizable,extremely easy to maintain, and have top of the line performancecharacteristics.
Here’s a list ofthe distinguishing AS5 features:
The Advanced System 5 is almost completely fabricated using 3D printing usingspecial high strength mixed ABS filament.The main body components are 3D printed. The outer barrel, inner barrel, and trigger are metal. The stock pad is injection molded rubber.
It does not use magazines!
The gun has an integrated BB storage area that auto feeds BBs when you pull the trigger. No need to carry multiple magazines, no hi-cap magazine winding, no need for push button speed loaders on mid cap mags.
The integrated BB storage area has 3000(!) round capacity, with an easy access quick fill port.
Lightweight, under 6 lbs unloaded.
Tool-less design. Single push button access to hand guard compartment and separate the upper and lower receivers, which provides full access to the hopup and barrel. No pins or screws to remove for basic maintenance.
Uses standard M4 outer barrels.
Uses a standard M4 hopup and standard AEG inner barrel. Full length Picatinny top rail, with adjustable and removable riser/handle. Integrated side rails and bottom rail.
Fully ambidextrous operation.
Supports Safe, Semi and Full Auto modes*
Designed to support virtually all the current high pressure air (HPA) engines.
The AS5 can use the PolarStar M249 Fusion Engine (with an M4 nozzle) as well as cylinder replacement HPA engines like the Wolverine Inferno, PolarStar JACK/F1, and Protech MKII.
Custom chassis works with nearly all HPA cylinder replacement engines, making it extremely easy to install the HPA engine of your choice.
The AS5 is designed to allow the gearbox or HPA engine to be easily installed and removed for maintenance. By removing only two screws, the entire engine can be extracted.
The grip is designed to hold the HPA engine FCU and battery. It is designed so it can be tournament locked, if required.
The AS5 comes with a stainless steel 6.04x363mm inner barrel.
Uses standard 9V to power the internal BB feed mechanism (independent from the HPA engine or gearbox). The max ROF with a 9V is around 20-25 RPS (depending on BB weight). With the 9V Battery Eliminator Kit, a 11.1v lipo can be used which will increase the max ROF closer to 40 RPS.
Barrel (363mm inner barrel)
Overall length (with flash hider): approx 32" (long version)
Weight: 5.5 lbs (unloaded)
The optional 9V Battery Eliminator Kit moves the feed mechanism battery to be located in the front hand grip. This will allow you to use a 7.4v or 11.1v lipo to power the feed mech (with JST battery connector), and optionally power the FCU from the same battery.
All AS5s will be shipped with a bright orange flash hider.
The majority of the AS5 is 3D printed using FDM technology and a special high strength ABS alloy filament. The body is printed using 200 micron layers and minimal post processing is performed on the parts, so each AS5 is effectively a raw 3D print and it will have unique feel, and it is evident that it is a 3D printed gun upon very close inspection. But don't let that detract from the functionality of the gun. It is Designed To Dominate the airsoft field!
KENTUCKY RESIDENTS. You must be 18 years of age or older to purchase any Airsoft Replica from BG Airsoft. An over 18 age waiver is required for all Replica Purchases. You DO NOT need a waiver for parts and accessories. Before your order is shipped you must download, sign, scan and email a signed Waiver to email@example.com Waivers can be downloaded by clicking on the BG Airsoft Waiver Link at the bottom of the menu on the left of this page.
While the sport of Airsoft is designed to be enjoyed by all ages, ignoring proper safety practices can turn a day of fun into a tragedy. Todays modern airsoft guns are capable of firing a BB at velocities that can and will penetrate fabric and skin, causing serious injury. Always wear "Full Seal" eye protection and observe proper weapon handling practices such as keeping the weapon on "safe" and cleared with the magazine out to prevent accidental discharge. REMEMBER!! Safety begins with the shooter!!