Bingo Airsoftworks Basic Trigger Conversion kit.
For those that are doing custom installation of the Wolverine SMP and by-passing the use of the stock trigger board, we have mini circuit board kits available that allow you to connect the solenoid, trigger switch, and full auto switch to the FCU without having to cut the wire harness. The SMP mini circuit board kit includes connectors for the solenoid, trigger switch, and full auto switch. The kit will also include a microswitch and mounting screws to be used to activate the fire select. Note that soldering will be required. You’ll need to solder the wire connectors to the trigger and full auto switches. There are currently two Wolverine wire harness available.
Revision 1 Kit - For FCU cables that attach directly to the Trigger Board only.
Revision 2 kit - For FCU Cables that plug to both the trigger board and SMP unit
KENTUCKY RESIDENTS. You must be 18 years of age or older to purchase any Airsoft Replica from BG Airsoft. An over 18 age waiver is required for all Replica Purchases. You DO NOT need a waiver for parts and accessories. Before your order is shipped you must download, sign, scan and email a signed Waiver to email@example.com Waivers can be downloaded by clicking on the BG Airsoft Waiver Link at the bottom of the menu on the left of this page.
While the sport of Airsoft is designed to be enjoyed by all ages, ignoring proper safety practices can turn a day of fun into a tragedy. Todays modern airsoft guns are capable of firing a BB at velocities that can and will penetrate fabric and skin, causing serious injury. Always wear "Full Seal" eye protection and observe proper weapon handling practices such as keeping the weapon on "safe" and cleared with the magazine out to prevent accidental discharge. REMEMBER!! Safety begins with the shooter!!